FS9108 fire retardant adhesive
Flame retardant adhesive is a kind of polymer adhesive formed by high temperature and high pressure polymerization of inorganic raw materials such as aluminum phosphate, magnesium silicate, sodium silicate, fire retardant agent and inorganic polymer polymerizer.
Features:
In addition to good physical and mechanical properties and electrical properties, flame retardant rubber products also have good flame retardancy and self-extinguishing.
Purpose:
Mainly used in industrial production need to reach a certain level of flame retardant environment of various structural bonding seals, such as :CRT picture tube, DY deflection coil and other high voltage parts of the insulation bonding and sealing; Fixing and bonding of PCB sensitive components, capacitors, triodes, etc. Refrigerator, microwave oven, circuit board, electronic components, solar energy field bonding seal.
Performance parameters:
Performance index |
|
appearance |
White paste |
Relative density (g/cm3) |
1.35 ~ 1.45 |
Surface drying time (min) |
5 ~ 30 |
Hardness (Shore A) |
40 + 2 |
Tensile strength (MPa) |
2.0 or higher |
Shear strength (MPa) |
1.0 or higher |
Elongation at break (%) |
P 200 |
Flame retardant rating |
FV-0 |
Temperature range (℃) |
- 60 ~ 250 |
Note:
1. Keep away from children.
2, this product will release small molecules during the curing process, have a slight irritating effect on the skin and eyes, it is recommended to use in a well-ventilated place.
3, in case of contact with skin, wipe clean, and then rinse with water; In case of contact with eyes, rinse immediately with water and go to hospital for examination.
Packing specification:
100ml/ PCS,100 PCS/box and 300ml/ PCS,30 PCS/box two kinds of packaging.
Storage and transportation:
1. The storage period of fixed adhesive for power supply flame-retardant components is 12 months (8-25°C).
2, power supply flame-retardant components fixed adhesive is non-dangerous goods, can be transported according to general chemicals, be careful in the transportation process leakage!
3, more than the storage period of the power supply flame retardant components fixed adhesive should be confirmed if there is no abnormal before use.