The FS7227 can be coated with ceramic coating
Performance characteristics
1. High gloss, low friction surface;
2. Quickly update worn surfaces to reduce downtime;
3. High adhesive force to form a strong bond;
4. Suitable for large area repair of fine particle wear equipment and preparation of pre-protective coating.
Product characteristics
The coating is a two-component ultra-smooth surface coating that creates a high-gloss, low-friction, waterproof and dust-proof surface that provides long-term protection against fine particle wear and corrosion.
Technical index
colour |
Mixed state |
Density (g/cm3) |
Compressive strength (Mpa)GB/T 1041-2008 |
Shear strength (Mpa)GB/T 7124-2008 |
Bending strength (Mpa)GB/T 9341-2008 |
Tensile strength (Mpa)GB/T 6339-2009 |
hardness |
Medium grey |
paste |
1.62 |
102.0 |
18.0 |
62.0 |
30.6 |
89.0 |
Curing properties of FS7227 (Test condition: room temperature) |
||||
Operating time |
Curing time |
Full load curing time |
Operating temperature to ensure wear resistance |
Wear parameter GB/T3960 |
30min |
Room temperature 24h |
48h |
- 60 ℃ ~ 160 ℃ |
U = 0.04 / delta m = 64 mg |
Usage method
1, surface treatment: the pre-coated parts of the rust and coarsening treatment, and then clean with cleaning agent, wipe with dry cloth;
2, configuration: according to A:B=4.8:1 mix the two components evenly, and use up within the specified operating time limit;
3, brushing: slurry mixed material spray, roll coating or scraping and repair parts, the glue layer is appropriate to 0.2-0.3mm, so that it and the substrate full infiltration;
4, curing: 25~30℃ curing 24 hours into use, if the temperature is low should be used to heat or extend the curing time to promote curing.
Matters needing attention
The product parameters are obtained by the enterprise laboratory test, the results are reliable, but not as a basis for purchase and claims; Due to the complexity of the actual working conditions, it is recommended that users pre-test according to the actual working conditions to determine whether the product is suitable for the real working conditions, and the company will not bear the direct or indirect losses caused by judgment errors.
Storage and expiration date
Non-dangerous goods, please store in a cool and dry place, valid for 24 months;
Packing: 2kg/ set,6kg/ set; Can be changed according to customer needs.