Current location：
hot product
hot news
message
detail
FS-5319 is a kind of structural glue which can provide strength of epoxy resin and curing speed of instant glue . It is suitable for sticking of plane rigid material ,such as sticking ferrite to plating metal parts of the motor or the speaker accessories. It can also be used for bonding steel ,iron,copper,aluminum and other metal and glass and some hard plastic
Features
1.one component medium viscosity high strength after curing
2.good solvent resistance
3.fast cure speed
Technical Data Sheet
| Appearance | Purple |
| Viscosity CPS（25℃） | 700-1000 |
| Filling gap （MM） | ≤0.4 |
| Shearing strength （MPA） | 15~17 |
| Curing time at 25℃(surface/full) | 10-17min/24hr |
| Working temperature（℃） | -40℃～+149℃ |
Use Method
1. Use acetone or richloro ethylene clean sticking parts for two times ,thoroughly remove oil and rust .
2. Apply glue evenly after solvent is volatilize , make sure glue applied to full surface of sticking area .
3.After gluing , keep static for several minutes. It can be moved after initial location .
Notice
1. Store in dry and cold place under room temperature
2. Prevent other material polluting glue.
3. Use accelerator short curing time ,when filling gap is bigger or temperature is lower .
Packaging Spec.: 50ml/tube,120tubes/carton;250ml/tube,40tubes/carton
