It is a high performance polymer metal material composited by a variety toughening heat resistant alloy materials, widely used in all kinds of casting defect repair. The color of the repaired parts remains the same and has the very high intensity, and can undertake all kinds of metal processing, together with the base material.

Product features:

1. The curing material has high strength and can undertake all kinds of mechanical processing

2. It has high bonding strength with metal

3. Basically the same color after repairing

4. Application range is wide. It is suitable for all kinds of metal material defect repair and regeneration

5. It has wear-resisting corrosion resistance and aging resistance properties.

101 casting defect repairing epoxy resin adhesive

The physical status is paste. The volume is 309 cm³. Operation time limit is 45 mins and cure time is 24 HRS. Comprehensive mechanical performance is good. It is especially suitable for gray iron, ductile iron and other materials. It is used in repair of cast iron parts, such as casting defects of fill and parts ,  wear , corrosion and fracture repair.

Packing:

500g/set ,16 sets/carton

111 Epoxy adhesive for casting steel repair

The physical status is paste. The volume is 309 cm³. Operation time limit is 45 mins and cure time is 24 HRS. Comprehensive mechanical performance is good. It is especially suitable for gray iron, ductile iron and other materials. It is used in repair of cast iron parts, such as casting defects of fill and parts ,  wear , corrosion and fracture repair.

Packing:

500g/set, 16sets/carton

112  Steel Casting Repair Adhesive

Physical status is paste-like. Volume is 298 cm³. Operation time limit is 45 mins and cure time is 24 HRS. It has wear resistance and high bonding strength and used for a variety of carbon steel, alloy steel, stainless steel, such as filling of casting defect and repair parts wear and tear and corrosion cracking.

Packing: 500g/set, 16sets/carton

113 Aluminum Repair Epoxy Putty Adhesive

The physical status is paste. The volume is 309 cm³. Operation time limit is 45 mins and cure time is 24 HRS. Comprehensive mechanical performance is good. It is especially suitable for gray iron, ductile iron and other materials. It is used in repair of cast iron parts, such as casting defects of fill and parts ,  wear , corrosion and fracture repair.

Packing: 250g/set, 16sets/carton

114 Copper Casting Repair Epoxy Putty Adhesive 

The physical status is paste. The volume is 309 cm³. Operation time limit is 45 mins and cure time is 24 HRS. Comprehensive mechanical performance is good. It is especially suitable for gray iron, ductile iron and other materials. It is used in repair of cast iron parts, such as casting defects of fill and parts ,  wear , corrosion and fracture repair.

Packing: 250g/set, 16sets/carton

Main technical data sheet:

Usage method:

Surface treatment: surface coarsening processing of repairing and detergent for cleaning.

Make up: mix A with B according to the proportion on the instructions and use the material up within the prescribed period.

Coating: the mixed coating should be applied on the repair parts layer after layer. The first layer should be compacted, fully infiltrated to the base material. If the following needs mechanical processing, set aside an appropriate machining allowance.

Curing: 25 to 30℃ working condition ,8 hours curing then could mechanical processing. It can be put into use after 24 hours. If the temperature is low, the curing time can be prolonged.