High Strength Structural Adhesive

It is composed of high performance modified toughness resin , and can bond with the same materials or different materials. It can replace some traditional process like riveting ,welding and thread connection.  

Product features:

l    The stress distribution is uniform

l    No need heat treatment. It has no heat affecting or thermal deformation to components

l    High bonding strength. It can replace riveting and soldering process

l    Bond with different materials.

High Strength Adhesive Series

801 Rubber adhesive

Packing：550g/bottle、16bottles/carton

Physical status is paste-like. Volume is 598 cm³ coverage. Operation time limit is 20-40 mins at 25℃. It can be used for 2 hours. It has high bonding strength and is used for bonding rubber, leather, conveyer belt, metal, ceramic and wood. Mix ratio is 9:1

803 High Strength Structural Adhesive 

Packaging spec.: 500g/set 5kg/set

Physical statues is paste ,volume or fraction coverage is 340cm³、3400 cm³,operation time limit is (25℃) 50min,it can be used for (25℃) 24hour ,high sticking strength ,good toughness , have high sticking strength with various material ,such asiron and steel ,cement ,ceramic ,aluminum alloy and stainless steel , can work under high temperature up to 180℃ for long term ,specially suitable for bonding wear-resistance ceramic plates. It's widely used in mid-speed coal mill, coarse powder separator, mill exhauster, pulverized coal piping, and wear-resistance ceramic plates in steel, concrete and chemical industry.

804 High Strength Structural Adhesive 

Packing：500g/set、5kg/set

Physical statues is paste, volume or fraction coverage is 340cm³、3400 cm³,  operation time limit is 50mins at 25℃, active time is 24 hours at 25℃. High bonding strength, it's suitable for bonding wear-resistance ceramic plates vertical and top surface.

811 High Strength Structural Adhesive 

Packing：250g/set、16sets/carton

Physical statues is paste, volume or fraction coverage is 115cm³, operation time limit is 45mins at 25℃, active time is 6 hours at 25℃. High bonding strength, it's suitable for bonding metal, ceramic and wood. It's widely used in bonding broken parts in lathe, tank and large modulus gear.

Main Technical data