Current location：
hot product
hot news
message
detail
General purpose , curing time is slow ,can be adjusted within 1hour, strength nearly remain the same .It can stick to soft material and metal (exclusive copper) in electronic products ,hard plastic ,ferrite ,ceramic,glass and so on .
Features
1.two components without precise measurement , the surface needs no strict treatment
2.Good operation ,it is suitable for pipeline operation
3. slow curing speed, the intensity can be got within 2 hours.
4.High bonding strength and good shock resistance.
5.Bond with a lot of material
Technical Data Sheet
| Product Category | Feature | Viscosity | Curing time | Tensile shear strength(MPa) | Shock strength | |
1104 | A group | Red thick liquid,no mechanical impurities | 6000+/-500 | ≤45min | 》17 | 》8 |
B group | Green thick liquid,no mechanical impurities | 6000+/-500 |
Use Method
1. Mix glue A and B at 1:1 , apply the glue to stikeed material and press tightly.
2. If sticked material is of large area, stick A group to one side , stick B group to the other side , and make two sides together and press them tightly .
Notice
It contain flammble solvent , usage and storage must be away from fir , working area keep good vetilate.
Store and shelf life:
store in cold and dray place ,shelf life is 1 year.
Packaging spec.
2kg/set ,6sets/carton ;4kg/set,6sets/carton;50kg/set
