Current location：
hot product
hot news
message
detail
Description
It is transparent ,can be used to sealing and sticking of industrial products and crafts ,the max filling gap is up to 6mm.
Features
◆. single component , have good sticking to many material such as metal sheet and glass
◆. excellent ageing weahter ,anti UV and ozone ,waterproof is good ,corrosion resistance is good
◆. superior high and low temperature , property does not change when temperature ranges from
Technical Data Sheet
Appearance | Transparent | Viscosity | Paste |
Ratio | 1.0～1.1g/cm3 | Hardness(Shaw A) | 30～35 |
Tensile strength | 0.85～1.5MPa | Shear strength | ≥1.0MPa |
Plastic modulu | 1.0 | Working temperature | -50～180℃ |
-20℃Elongation and adhesion | No damage | curing at surface | 10min（20℃，50% RH） |
1. Prepare base material:
Firstly, eliminate the unascertainable factors, such as metal coating and painting surface. Remove the unconsolidated formation of the gluing parts. Make sure it has enough adhesion on coating and painting surface. If adhesion is small, use special cleaner to clean the gluing parts. To make the parts clean, solid and dry. Remove the surface dirt like mold-release agent, curing membrane and hydrophobic agent.
2. Gluing:
Pour out adhesive directly. Bubbles will break automatically when adhesive is flowing.
Clean up the rest adhesive before curing. Process the components 3 hours later. It gets to highest bonding strength 24 hours later (Low temperature will slow down the curing time). After curing, use knife to cut down the adhesive film. Don’t use hand to tear the adhesive film.
Store and shelf life
Belong to non dangerous goods , please store it in dry and cool place under 27,shelf life is 12 months
Notice
It is non toxic after curing , keep away from eyes and children , working area keep ventilate
