Current location：
hot product
hot news
message
detail
Anaerobic , one component adhesive. Keep fluid state when exposed in the air, when assembled with parts , the fluid glue flowed into gap or scratches ,and achieve to make metal and metal 100% contact, insulate air and cure immediately under the action of metallic ion ,seal out of forming a glue layer with eternal flexibility and rigidity . It improve reliance of sealing and whole rigidity and bearing capacity . And can meet the forming and curing on the site . The extruded remnant can be cleaned easily due to without curing in the air . Formed gasket have good resistance of pressure ,temperature ,corrosion.Use it at convenience and have exceed sealing practicality, gasket alternative , make static sealing of small gap, widely used to seal in automobile ,motorcycle ,various machinery and tank ,flange, end cover.
510 Anaerobic flange adhesive
Packaging specification: 50ml/unit,60units/carton
Can endure high temperature up to 204℃, adhesive layer if of good rigidity , thixotropy viscosity , solvent resistance , no corrosion and good medium resistance ,it is used in plate static sealing with rigid structure and closing coordination or gasket coating . Such as plane sealing of engine gear box ,crankcase and cover board.
515 Anaerobic flange adhesive
Packaging specification: 50ml/unit,60units/carton
Generous purpose , flexible adhesive layer,thixotropy viscosity ,solvent resistance ,no corrosion, used to plane sealing of surfaces which are flexible or vibrate .Such as sealing of pump,gear box ,end cover ,flange ,axle parts.
518 plane anaerobic adhesive
Packaging specification: 50ml/unit,60units/carton
Generous purpose ,adhesive layer is flexible ,good resistance to fluid and solvent . Especially suitable for aluminum or aluminum alloy such as automobile and motorcycle engine plane.
Techinal Parameter
Model No. | Appearance | Max.Filling Gap(mm) | Max.Oil Pressure(MPa) | Working Temperature(°c) | 25°c curing(initially/fully)(hr) |
1510 | Red Paste | 0.25 | 36 | -54～+204 | 1～2/24 |
1515 | Purple Paste | 0.25 | 34 | -54～+150 | 1～2/24 |
1518 | Red Paste | 0.25 | 36 | -54～+150 | 1～2/24 |
Use points：
l sealing surface to remove oil and other impurities with acetone, dry.
l in the sealing surface, sealants painted a continuous circle.
l alignment closure, tighten bolts, avoid dislocation, reassembly after 20 minutes.
l stay static 30 to 60 minutes before positioning, 24 hours to fully cure.
