Current location：
hot product
hot news
message
detail
100% fills the thread clearance and forms a dry film without oxygen. The dry film will lock nuts, bolts and screws tightly to avoid vibration caused by loose. It has good performance of sealing, rust resistance and corrosion resistance. Users only need small amount of 200 series thread locking adhesive to ensure product quality and reliability.
Forsen 200 series threadlocker is one component adhesive, with fast curing and wide use of temperature ranges. The dry film is of good water-proof, oil resistance, shock resistance and corrosion resistance performance. The locking, sealing and gluing performance are good even there is slight dust on the thread surface. Forsen 200 series threadlocker has wide ranges of strength, viscosity and weather resistance, it's your best solution to solve problems in production and maintenance.
FS-1222 Thread Locker Adhesive
Packaging Spec.:50ml/bottle ,120bottles/box;250ml/bottle,40bottles/carton
Low intensity,thixotropy viscosity ,it is often used to fix and seal the thread that frequent remove,such as M2～M12 cross ＆ straight screw and small specification screws,tube head of locking and sealing .
FS-1242 Thread Locker Adhesive
Packaging Spec.:50ml/bottle ,120bottles/box;250ml/bottle,40bottles/carton
General type , medium strength ,thixtropy and viscosity for M6～M36 thread locking and sealing and strong key pin,such as screw ,nut locking .
FS-1243 Thread Locker Adhesive
Packaging Spec.:50ml/bottle ,120bottles/box;250ml/bottle,40bottles/carton
High intensity ,thixotropy viscosity ,good chemical resistance, it is suitable for most of the metal surface,thread locking and sealing ,such as engine thread locking and sealing under M20.
FS-1262 Thread Locker Adhesive
Packaging Spec.:50ml/bottle ,120bottles/box;250ml/bottle,40bottles/carton
Middle intensity ,soluble oil,it can be used in slightly oily surface. It can be used in the inert surface,fast curing . It is used thread locking and sealing,such as removing the tank pan screws under M20.
FS-1271 Thread Locker Adhesive
Packaging Spec.:50ml/bottle ,120bottles/box;250ml/bottle,40bottles/carton
Ultra high intensity ,medium viscosity , it is used for thread locking and sealing under M36.
FS-1272 Thread Locker Adhesive
Packaging Spec.:50ml/bottle ,120bottles/box;250ml/bottle,40bottles/carton
High intensity ,high viscosity ,anti high temperature (230℃).It is used in high temperature conditions of bolt locking and sealing.
FS-1277 Thread Locker Adhesive
Packaging Spec.:50ml/bottle ,120bottles/box;250ml/bottle,40bottles/carton
High intensity ,high viscosity and chemical resistance. It is suitable for active metal surfaces. It is used to thread locking and sealing of large size, flange sealing, and it can replace the gasket under M56.
FS-1290 Thread Locker Adhesive
Packaging Spec.:50ml/bottle ,120bottles/box;250ml/bottle,40bottles/carton
Medium intensity ,low viscosity ,high permeability,it is used to have assemble the M2～M12 thread locking and sealing,weld ,casting sand holes(〈0.1),and other micro hole sealing.
FS-1340 Thread Locker Adhesive
Packaging Spec.:50ml/bottle ,120bottles/box;250ml/bottle,40bottles/carton
High strength ,medium viscosity,unversal. It is used for thread locking and sealing and used for bearing or flange and sealing under 36.
Technical Data Sheet
Item No. | Max. Filling Clearance(mm) | Viscosity(mPa.s) | Breaking Moment(N.m) | Average Disassembly Moment(N.m) |
1222(Purple) | 0.13 | 1200 | 6 | 4 |
1242(Blue) | 0.13 | 1200 | 12 | 4.8 |
1243(Blue) | 0.13 | 2300 | 20 | 7 |
1262(Red) | 0.13 | 1900 | 21 | 25 |
1271(Red) | 0.13 | 500 | 25 | 31 |
1272(Red) | 0.25 | 9500 | 28 | 25 |
1277(Red) | 0.25 | 7000 | 38 | 32 |
1290(Green) | 0.10 | 37 | 30 | 29 |
340(Light yellow) | 0.25 | 2500-3500 | 20 | 18 |
Use method
1. For general purpose threads, users need clean threads by rag. Clean the important threads by acetone. Then, use the adhesive.
2. For thixotropic adhesive, shake it up before use.
3. For blind hole, users need fill adhesive inside it first.
4. For Long engaged bolt, both internal thread and external thread should be covered with adhesive.
5. Use normal hand tools to disassemble low/middle strenth thread with anaerobic adhesive. Use high torque or high temperature heating(250℃) to disassemble high strenth thread with anaerobic adhesive.
6. The rest adhesive is prohibited to mix into original adhesive liquid. Metal and oil can't be mixed into adhesive bottles.
7. The adhesive is suitable for metal materials like iron, copper etc. Use accelerating agent for inert metal and non-metallic materials. Accelerating agent can be used after dry by airing.
