Current location Current location:home > Product > Vehicle Maintennance
Product
Product

Product

product

3+3 RTV Silicone Gasket Maker

DESCRIPTIONForsen 3+3 RTV silicone gasket maker is neutral RTV silicone sealant and alternative gaske……

Related
message
detail
content details

DESCRIPTION

Forsen 3+3 RTV silicone gasket maker  is neutral RTV silicone sealant and alternative gaskets, meet the request of repair and  production . Be used and curing in common working situation easily .It is widely being used in automotive ,motorcycle ,marine and mechanical equipment of engine,gearbox ,axle plane sealing.

          

FEATURES & BENEFITS:

Temperature and oil resistance 

No shrinking after curing 

Eco-friendly , non-toxic ,easily disassembly

Non-flowing when working 


HOW TO USE

  1. Clean all surface thoroughly . Remove old gaskets and prepare flange surfaces. Dry and remove all oil and grease

  2. Cut nozzle to desired bead size .Gasket are best formed using a 1/16" to 1/4" bead

  3. Apply a continuous , even bead of silicone is still wet.Finger tighten until material begins to squeezeout around flange. 

  4. Silicone will skin over in one hour and fully cure in 24 hours under normal conditions.Allow more time for cold or very dry 

  5. Clean uncured silicone from hands , tools and clothing  fast.

STORAGE AND DISPOSAL

Not damaged by freezing.Close the tube tightly after each use. Store product in the unopened container in a dry location. Optimal  storage is between 46℉(8℃) to 70 ℉(21℃)

LABEL PRECAUTIONS

Avoid eye and skin contact . For eye contact , flush with water for 15 minutes , call a physician . For  skin contact ,wash,thoroughly with soap and water . If swallowed , do not induce vomiting. Obtain medical Attention.


KEEP OUT OF THE REACH OF CHILDREN


DISCLAIMER

The information and recommedations contained herein are based on our research and are believed be be accurate, but no warranty , express or implied,is made or should be infeered. Purcahsers should test the products to determine acceptable quality and suitability their own intended use. Nothing contained herein shall be construed to imply the nonexistence of any relevant patents or to permission, inducement or recommendation to practice any invention covered by any patent, without authority from the owner of the patent.


 TECHNICAL DATA

Item Code.APPREARANCEMAX FILLING GAPElongationTemperatureMax Oil Pressure  25℃ Curing Seal Time
(mm)(%)(℃)(MPa)(Surfcace/Full)
3+3 Blackblack paste6180-60---+2501030mins/24 hrsinstant
3+3 Redred paste6180-60---+2601030mins/24 hrsinstant
3+3 Silversilver paste6180-60---+2501030mins/24 hrsinstant

MESSAGE

LEAVE A MESSAGE