Current location：
hot product
hot news
message
detail
FS-1026 Low Odor AB Adhesive
Main application:
FS-1026 low odor ab adhesive is new generation of traditional ab adhesive, with lower odor, higher bonding strength and faster curing time than traditional ab adhesive. It’s widely used in bonding DC motor, magnet generator, fan electromotor, heater motor, all kinds of micro-motor with motor housing in electronic industry. It can also bond all kinds of metal, ceramic, jade, wood, hard plastic, concrete, water tank, oil tank, transformer, nameplate, lamp, electronic components, vehicle and motorcycle parts.
Product features:
1. Low odor. Very small pungent smell in summer and mass construction.
2. No wire drawing. Good operational performance.
3. Two components. Don’t need accurate measurement and serious surface treatment.
4. Fast curing time. It can be positioned within several minutes and be used after 1 hour.
5. Good bonding strength to many materials except copper, aluminum, chrome plating material, PE and PTFE.
Technical data sheet:
Appearance | A：Dark brown viscous liquid |
B：Clear viscous liquid | |
Viscosity (mPa.s/25℃) | A：4000~5000 |
B：4000~5000 | |
Tensile shear strength（steel×steel.MPa） | 18 |
Weight steel(g/cm³,20℃) | 1.01±0.02 |
Impact strength（kJ/m2） | 13 |
Solid content | 100% |
Heat resistance ℃ | -60-120 |
Initial curing time（25℃） | Initial curing time: 3-5 minutes. Whole curing time:24 hours |
Storage life（25℃） | One year |
Usage method:
1. Mix group A and group B by ratio of 1:1, and stir the adhesive. Then glue the adhesive to parts surface and press the parts tightly.
2. Glue group A to one part and glue group B to another parts. Then make two parts connect tightly.
Matters need attention:
Keep away from fire, keep working environment with good ventilation.
Storage life:
One year in cool and dry place.
Packing:
2kg/set, 6sets/carton; 4kg/set, 6sets/carton; 50kg/set
