Current location：
hot product
hot news
message
detail
Two components ,It is made up of all kinds of high performance wear resisting ,corrosion resistant material or antifriction material (such as ceramic ,silicone carbide ,titanium alloys,molybdenum disulfide etc.) and modified composite toughening heat-resistance resin to get a high performance wear resisting corrosion polymerization ceramic material . It can be widely used in all kinds of wear parts repair and all kinds of wear resistance anti corrosion for organic surface preparation anticorrosive coating .
Features
l anti corrosion is 2times as normal metal
l have high sticking strength with basic material of metal
l easy to operate , no need of the high technical requirement for operation personnel .
l suitable for repair and protection to all kinds of corrosion condition .
406 Anti-Corrosion Repair Agent Adhesive
Packaging Spec.:500g/set ,16sets/carton
Physical status is paste ,volume is 364cm³,operation time limit is (25℃) 45min,it can be used for 24hours(25℃). It can repair all kinds of room temperature corrosion of pump ,valve ,pipe ,heat exchanger end plate,blade and to protection of large area.
416 Anti-Corrosion Repair Agent Adhesive
Packaging Spec.:250g/set ,16sets/carton
Physical status is paste ,volume is 182cm³, operation time limit is (25℃) 45min. It can be used for 24hours(25℃) . It can be used for local repair for corrosion of pumps and blade,acid and alkali storage tank,chemical pipe ,etc.
Technical Data Sheet
Item No. | Color | Density(g/cm³) | Compress strength (kg/cm2) GB1041-79 | Tensile strength (kg/cm2) GB6329-86 | Shear strength (kg/cm2) GB7124-86 | Bending strength (kg/cm2) GB1042-79 | Hardness （Shore D） ASTM-D-2556 | Relative wear resistingβ or Friction coefficient μ GB3960-83 | Working temperature （℃） |
406 | Blue | 1.38 | 1004 | 353 | 254 | 562 | 86 | β:1.9 | -60～150 |
416 | Gray | 1.37 | 1113 | 337 | 233 | 543 | 88 | β:2.2 | -60～150 |
Usage Method
l surface treatment:make the need repair surface rough , make the surface have 1.5mm deep thread and then clean with cleaning agent
l Mixing: mix A with B according to the proportion
on the instruction and finish it within the specified operating period .
l Coating: apply the mixed coating layer by layer on the repair part.The first layer should be compacted,fully infiltrated with the base material . If the following needs mechanical processing ,leave appropriate machining allowance.
l Curing: the temperature is from 25 to 30 degrees. After 8 hours curing , it can undertake mechanical processing and can be put into use after 24 hours. If the temperature is low ,please heat them or keep longer time for curing .
