Polish the wound (slightly larger than the damaged part), clean it with professional cleaning agent, then brush the rubber substrate (component C), let dry naturally, pour the main glue of 916 rubber repair agent (component A) and curing agent (component B) into the glue mixing cup, and immediately pour into the damaged part, and scrape it.

Conveyor belt patch quick repair process

First mark the contour of the wound (select a patch of appropriate size), then use a professional Angle grinder with a polishing dish of moderate grinding degree to polish the wound until the surface of the damaged part shows a certain arc without protrusion. Then brush 801 rubber adhesive mixture, after drying, apply again, let dry until slightly sticky but not attached to the back of the finger can be. Paste the patch on the wound area and avoid air inclusion during the paste process. The patch is then rolled from the inside out using a compacting roller to compact it and remove air bubbles.