Anaerobic adhesive applications in the industrial field:
1. Structural bonding:
a, two-component structure bonding epoxy adhesive is mainly used for metal, ceramics, engineering plastics, wood, stone, glass bonding. And high bonding strength, good toughness, aging resistance.
2, metal repair:
A. Fill and repair defects such as pores, sand holes, shrinkage and cracks in castings larger than 2mm, such as cracks and perforations in pipelines and gas storage tanks.
b, aluminum and aluminum parts wear, corrosion, crack repair.
c, casting holes, sand holes, shrinkage, cracks and other defects fill.
d, bronze, brass parts wear, corrosion, crack repair.
e, gray cast iron, ductile cast iron defects repair.
f, pressure vessels, pipelines, welds and castings crack, shrinkage and leakage seal.
g, carbon steel, alloy steel, stainless steel parts wear, scratch, corrosion, fracture repair.
3, wear repair:
a, repair wear and failure of the shaft diameter, shaft hole, keyway, bearing seat.
b, wear particle diameter less than 3mm abrasive wear, erosion wear parts repair and pre-protection, repair small particle erosion wear of the pump body, impeller, fan shell, screw conveyor.
c, particle diameter less than 25mm abrasive wear parts repair and pre-protection, repair large particle abrasive wear slurry pump, slurry agitator, conveyor bend.
4, anti-friction repair:
a, the coating friction coefficient is low, self-lubricating, repair wear machine guide rail, hydraulic cylinder scratch, shaft sleeve, piston rod.
5, corrosion resistance repair:
a, anaerobic glue long-term immersion does not fall off, erosion resistance, repair the electric power, metallurgy, petrochemical and other industries corroded pumps, valves, pipelines, etc., can be brushed on a large area.
6. Emergency repair:
a, anaerobic rubber repair equipment pipeline, seal cover plate, radiator, water tank, gear box through, hole corrosion, leakage.
7. Wet surface repair:
A. Repair pipes, valves, shells and boxes under wet conditions.
8, high temperature repair:
a, anaerobic glue repair wear, scratch, corrosion, cracked parts under high temperature conditions.
9, high temperature seal repair:
a, anaerobic adhesive repair, sealing under high temperature conditions of acid, alkali, oil, steam equipment and bonding surface, resistant to superheated steam, acid and alkali corrosion, high pressure, temperature 320℃.