1. Acrylic AB adhesive: The main material is acrylic ester. Room temperature curing, high mechanical strength, toughness. A wide range of materials can be bonded. Mainly used in all kinds of result bonding. For example, the bonding of metal/hard plastic/wood/stone/ceramic/jewelry. Pay attention. Such AB glue on copper. Aluminum. Cadmium plating material.PP and Teflon bonding is not good. Acrylic AB adhesive is generally 1:1 mixed.
2. Epoxy resin AB glue: The main material is epoxy resin. Room temperature curing, high mechanical strength, toughness is not as good as acrylic AB rubber, but the hardness is higher than it. The material that can be bonded is also very wide, and the result bonding can be done. However, the viscosity of epoxy resin is greatly affected by temperature, so there is no good control of acrylic AB adhesive in the process. Epoxy resin AB adhesive can also be used as potting adhesive in addition to the result bonding, especially the potting of electronic parts with high confidentiality requirements are made of epoxy resin. The resulting bonded epoxy resins are generally 1:1 mixed. According to the situation, there are 2:1, 4:1, 10:1 and other multi-medium mixing ratio.
3, silicone AB rubber: the main material is silicone rubber. Silicone rubber AB is mainly used in various potting. For example, LED module potting, LED lamp potting. Potting and sealing of electronic parts. Mixing ratio is not fixed, there are 10:1, 8:1 and so on.

Xiangyang Fengshen new material adhesive manufacturer, welcome to inquire QQ879830916 cooperation