Rubber conveyor belt repair method-Xiangyang Fengshen New Materials Co., Ltd

News

news

hot product

Rubber conveyor belt repair method

Category：Product knowledge time： 2024-03-11 Author：Xiangyang Fengshen New material Co., LTD

Share：

QR code sharing

The conveyor belt is a short life and price part of the conveyor equipment, and the reliability of the conveyor depends on the quality of this part. In the conveyor industry, the belt conveyor accounts for 95% to 97%. The docking and repair of the conveyor belt is a tricky problem, and the loss caused by the shutdown of the conveyor belt due to damage may exceed the value of the conveyor belt. Timely repair of the conveyor belt, including repair at the site of its use, can prevent the expansion of local damage, remove dust and moisture from falling onto the skeleton layer of the tape, and prevent damage to the skeleton layer.
When the belt conveyor is in operation, the conveyor belt can be buttoned and repaired by vulcanization or mechanical connection. Rubber conveyor belts can be buttressed and repaired by heating vulcanization or room temperature vulcanization, and rubber steel rope conveyor belts can only be buttressed and repaired by heating vulcanization. The hot vulcanization method (140°C ~ 150°C) is mainly used in black and non-ferrous metallurgical enterprises. This vulcanization method has a large labor consumption, requires a lot of electrical energy, and must be completed by a skilled professional team.
The advanced method of patching and docking tape is to use an adhesive for bonding. Since the adhesive can cure at room temperature, it is possible to repair the conveyor belt directly at the operating site without consuming too much power. Since the conveyor belt is often made of natural rubber, isoprene rubber, butadiene rubber, neoprene rubber, etc., it has a reinforced skeleton made of natural and synthetic fibers. So choose neoprene rubber based adhesive.
among801 Rubber adhesiveFor general purpose, used for transport belt, rubber, leather, metal, ceramic and other materials between the self-adhesive and mutual adhesive. The peeling strength of the adhesive part is better than the bonding strength between ordinary conveyor belt rubber and fabric.
916 Rubber repair agentIt is used for splicing repair of steel core, whole core and ordinary conveyor belt tear, and repair of conveyor belt surface wear, falling block, belt edge wear, belt surface perforation and joint sealing; Repair of cables, rollers and other rubber products.
Practice has proved that this series of adhesives can guarantee the necessary bonding strength and can be used for the repair and docking of conveyor belts. The use of room temperature curing adhesives can reduce the energy and labor consumption of repairing conveyor belts, and also increase the service life of conveyor belts.

Nav

News

Rubber conveyor belt repair method