Current location：
hot product
hot news
message
detail
Structural adhesive
Performance characteristics
1. High bonding strength;
2. Widely used, can realize the bonding of different materials;
3. The stress distribution of the bonding surface is uniform, and the parts have no thermal influence and deformation;
Product characteristics
811 high strength structural adhesive
Packing specification: 250g/ set mass ratio 4:1
Physical state is paste, operation time (25℃) 50min, curing time (25℃) 24h, reinforced epoxy, used for metal, cement, ceramics, stone, glass and other materials between the self-adhesive or mutual adhesive, especially suitable for strong impact vibration workpiece bonding, is a widely used structural bonding adhesive.
8011 high temperature structural adhesive
Packing specification: 250g/ set mass ratio 2:1
The physical state is paste, the operation time is 100min (25℃), the curing time is 48h (25℃), the mutual adhesion and self-adhesion between various materials under high temperature conditions, and the performance retention rate is high at high temperature.
| Structural adhesive (main physical and mechanical properties) | ||
| Performance name | FS/811(white) | FS/8011(Black) |
| colour | A: White paste B: yellow paste | A: Black paste B. Yellow paste |
| Mixing ratio | 4:1 | 2:1 |
| Operating time (25℃,min) | 50 | 100 |
| Initial setting time (25℃, h) | 3.5 | 6 |
| Full set time (25℃, h) | 24 | 48 |
| Shear strength (Mpa, GB/T 7214) | 22 | 26 |
| Peel strength (N/cm,GB/T 7122) | 11.6 | 10.5 |
| Operating temperature (℃) | 60 ~ 120 | - 60 - + 120 |
| Packing specification | 250g/ set | 250g/ set |
Usage method |
1. Surface treatment: coarsening the bonding part, and then cleaning agent 2. Configuration: According to the mass ratio A:B=4:1, the two components of A and B are mixed evenly and used up within the specified operating time limit; 3. Coating: evenly coating the adjusted glue on the surface of the material to be sticky; 4. Curing: 20 ~ 25℃ curing for 24 hours or 20 ~ 25℃ curing for 2 hours +80℃ curing for 2 hours can be put into use, if the temperature is lower than heating or extending the curing time to cure. |
Storage and shelf life |
Non-dangerous goods, stored in a cool and dry place, shelf life is 12 months; Packing: 250g/ set; 20kg/ set, plastic drum. |
