Current location：
hot product
hot news
message
detail
Anti-friction, positioning potting series
Performance characteristics
1. High accuracy of coating molding;
2. High bonding strength with metal;
3. The cured coating has low friction coefficient and excellent anti-friction and wear performance;
Product characteristics
311 anti-friction repair agent
Packing specification: 500g/ set mass ratio: 5:1
Two-component, mastic, with ultra-fine anti-friction lubrication material as the aggregate, the facade does not flow, the cured coating has self-lubrication, friction and wear resistance, machining and other properties, used for machine guide rail, hydraulic cylinder block, piston rod, sleeve, bearing seat support surface and other parts of scratch, wear repair.
312 anti-friction repair agent
Packing specification: 400g/ set mass ratio: 9:1
Two-component, low viscosity, good fluidity, self-lubricating performance, can be machined, used for injection molding method to prepare machine guide, hydraulic cylinder, piston rod, sleeve, bearing seat support surface anti-friction coating.
316 Anti-friction coating
Packing specification: 1kg/ set mass ratio: 6:1
Two-component, moderate viscosity, facade does not flow, with excellent wear resistance, suitable for the preparation of machine tool guide, hydraulic cylinder, piston rod, sleeve, bearing support surface anti-friction coating.
| Antifriction series (main physical and mechanical properties) | |||
| Performance name | FS/311 | FS/312 | FS/316 |
| colour | black | Dark gray | Dark gray |
| Mixing ratio | 5:1 | 9:1 | 6:1 |
| Operating time (25℃,min) | 55 | 60 | 60 |
| Initial setting time (25℃, h) | 4 | 6 | 6 |
| Full set time (25℃, h) | 24 | 48 | 48 |
| Shear strength (Mpa, GB/T7214) | 21.0 | 21.0 | 20.0 |
| Compressive strength (Mpa,GB/T1041) | 100.0 | 100.0 | 95.0 |
| Operating temperature (℃) | - 60 ~ + 120 | - 60 ~ + 160 | . - 60 ~ + 120 |
| Packing specification | 500g/ set | 400g/ set | 1kg/ set |
353 High strength positioning adhesive
Packing specification: 500g/ group mass ratio: 12:1
Two-component, with fluidity, a very small shrinkage rate and high compressive strength after curing, suitable for the precision adjustment of structural parts of the connection positioning, can simplify the traditional pin positioning or scraping contact positioning.
355 high precision positioning glue
Packing specification: 500g/ group mass ratio: 12:1
Two-component, with good fluidity, after curing has a small shrinkage rate and high compressive strength, suitable for small gap structural parts connection positioning, such as machine tool column, body connection after adjustment positioning.
399 High performance liner adhesive
Packing specification: 20kg/ group mass ratio: 15:1
Two-component, good fluidity, low shrinkage rate, high compressive strength, suitable for equipment assembly of large gap filling, can be used in crushers, ball mills and other grinding equipment between the lining plate and the matrix filling.
| Positioning potting (main physical and mechanical properties) | |||
| Performance name | FS/353 | FS/355 | FS/399 |
| colour | grey | grey | grey |
| Mixing ratio | 12:1 | 12:1 | 15:1 |
| Operating time (25℃,min) | 75 | 75 | 15 |
| Initial setting time (25℃, h) | 4 | 4 | 3 |
| Full set time (25℃, h) | 24 | 24 | 12 |
| Shear strength (Mpa, GB/T7214) | 18.0 | 18.0 | 20.0 |
| Compressive strength (Mpa,GB/T1041) | 150.0 | 120.0 | 118.0 |
| Hardness (Shore D, GB/T 2411) | 82 | 80 | 80 |
| Operating temperature (℃) | - 60 ~ + 120 | -60~+ 150 | - 60 ~ + 120 |
| Packing specification | 500g/ group | 20kg/ group | |
Special instructions
The product parameters are obtained by the enterprise laboratory test, the results are reliable, but not as a basis for purchase and claims; Due to the complexity of the actual working conditions, it is recommended that users pre-test according to the actual working conditions to determine whether the product is suitable for the actual working conditions, and the company will not bear the direct or indirect losses caused by judgment errors.
Storage life
Non-dangerous goods, please store in a cool dry place for 24 months;
Packing: 500g/ set; Can be changed according to customer needs.
