FS-9104 two-component potting adhesive
1. Product description
It is a neutral fast curing silicone two-component potting adhesive specially designed for potting and waterproof protection of wire harnesses, junction boxes, etc.
Second, product characteristics
◆. Moderate viscosity, good flow, easy to operate;
Third, product technical parameters
Typical technical parameter
precure |
colour |
A black, B translucent |
viscosity |
8000 + 100 |
Specific gravity |
1.2 to 1.24g/cm3 |
A:B |
10:1 |
|
After curing |
Mixed viscosity |
8000 + 100 |
Shore A hardness |
30 ~ 45 |
Line shrinkage rate |
0.5% |
Service temperature range |
-50 ~ 200℃ |
|
Breakdown voltage |
20Kv/mm |
Volume resistivity |
5 * 1016 or higher Ω * CM |
|
Dielectric constant |
2.8 (100KHz) |
Initial curing time |
1H (20℃, 50%RH) |
4. Methods of use
Unscrew the cap. Install the glue nozzle on the glue bottle and tighten it tightly.
Place glue bottle into 10:1 glue gun and apply glue.
After the initial solid can enter the next process.
5. Storage and expiration date
It belongs to non-dangerous goods, please store in a cool and dry place with a temperature below 30℃, valid for 6 months, and pay attention to sealing after use. If there is slight rubber on the surface due to poor sealing, it can be removed without affecting the use.
Six, precautions
This product is non-toxic after curing, but avoid contact with eyes and children before curing;