Happy to meet strong AB glue
Acrylate type two-component adhesive is a kind of strong adhesive which is easy to use, stable to store, widely used and popular by people. Curing speed is fast, 3-5 minutes in summer, 5-8 minutes in winter can be glued. The adhesive layer structure is firm and not easy to break, resistant to aging and oil pollution, and the adhesive is durable. The oil surface can be bonded, and the adhesive surface does not need to be strictly deoiled. Adhesive materials are widely used for self-adhesive and cross-adhesive of metals, ceramics, wood and plastics. Widely used in cars, motorcycles, agricultural machinery, electrical appliances, hardware, lamps, gas pipes, PVC water pipes, wood products, craft jewelry bonding, sealing, plugging and maintenance:

1. Used for self-adhesive, interadhesive, assembly and repair of various metal parts. Such as stainless steel accessories, elevator car wall stainless steel panel and liner, liner and reinforcement assembly, various castings, alloy parts, pipeline maintenance, instrument, instrument assembly, machinery, vehicle parts maintenance.

2, non-metallic parts such as most of the hard plastic, wood, stone, concrete parts of the self-adhesive, mutual adhesive, assembly and repair, including plastic lamps, handrails, sunshades, batteries, electrical plastic shell, plywood, a variety of decorative stone, wall materials bonding and maintenance.

3. Bonding between metal parts and non-metal parts. Such as polyvinyl chloride plate, plastic signs, signs and metal base plate bonding, magneto, speaker magnet material and metal base bonding, friction sheet steel sheet assembly, metal, non-metal assembly composite

4, vehicle industry applications, for cars, motorcycles plastic panels, bumpers, fuel tanks, water tanks, exhaust pipe quick repair.
Main physical and mechanical properties

Key points of use

l Remove dust, rust and obvious oil slick from the bonding surface without careful oil removal.

l Small area bonding, according to A: B= 1:1 rough volume ratio of premix, apply to the need for bonding maintenance, finger-pressure 5-10 minutes to solidify adhesive.

Large area bonding, can be double-sided adhesive, no need to premix, the coating should be thin rather than thick, after gluing two sides superimposed, fixed, according to the use of the situation, generally 10-20min to the next process.

The amount of glue should not be too much at one time, and it should be used up in 3-5 minutes. The adhesive surface does not need to be strictly deoiled, just generally clean and keep dry.

l Keep the operating environment well ventilated, slightly smelly, do not enter. Keep out of reach of children.

Packing specification: 20ml/ plate, box; 400 boards/boxes, boxes.