Fill the thread gap to form a dry film, lock nuts, bolts and screws to avoid loosening due to vibration, can play a good sealing, rust and corrosion prevention. Only a small amount of 200 Series thread locking sealant is required to ensure product quality and reliability.
Single component, fast curing, wide temperature range, the cured material is resistant to water, oil, shock and corrosion; In the case of slight surface pollution, it still has a good locking, sealing or bonding effect; A wide range of strengths, viscosity characteristics and thread locking agents for use in harsh environmental conditions offer options for solving your production and maintenance problems.
 
 
242 thread locking sealant
Packing specification: 10ml/ bottle, 240 bottles/box; 50ml/ bottle, 120 bottles/box
General purpose, medium strength, thixotropic viscosity, such as screw, nut locking
 
 
262 Thread locking sealant
Packing specification: 10ml/ bottle, 240 PCS/box; 50ml/ bottle, 120 bottles/box
Thixotropic viscosity, good chemical resistance, suitable for most metal surfaces, such as engine thread locks
Solid and sealed, can withstand strong vibration
 
271 thread locking sealant
Packing specification: 10ml/ bottle, 240 PCS/box; 50ml/ bottle, 120 bottles/box
Medium viscosity.
 
 
Main physical and mechanical properties

Key points of use

Threads for general use should be wiped with a cloth, important threads should be cleaned with acetone, and then coated with adhesive.

Thixotropic glue should be shaken well before use.

For blind holes, it is necessary to apply locking glue inside the holes first.

For long meshing bolts, glue should be applied to both internal and external threads.

Bolts that are locked with low and medium strength anaerobic glue can be removed using ordinary hand tools. The bolts, which are locked with anaerobic glue, are removed using high torque or heated at high temperature (250 ° C).

The unused glue liquid should not be mixed into the original glue liquid, and the metal and oil should not be mixed into the bottle.

It is suitable for the workpiece material of iron, copper and other metal materials, but for the surface oxide layer, inert metal or non-metallic materials, the curing speed is slow, can be used together. Allow to dry and apply glue for assembly.

Store in a cool place away from light, storage period is one year, more than one year after the glue is normal, can still be used.