Current location：
hot product
hot news
message
detail
FS405 Corrosion resistant coating
Performance characteristics
1. High bonding strength, high bonding strength with metal, cement and other substrates;
2. The surface of the cured material is smooth, hydrophobic, and low adhesion;
3. Resistant to yellowing and atmospheric erosion of Marine environment, with certain wear resistance.
Product characteristics
FS405 corrosion resistant coating is a kind of wear and corrosion resistant functional material. For anti-corrosion pre-coating or repair of Marine installations and equipment by brushing or spraying.
Technical index
Mixed color |
Mixed state |
Compressive strength (Mpa)GB/T 1041-2008 |
Shear strength (Mpa)GB/T 7124-2008 |
Bending strength (Mpa)GB/T 9341-2008 |
Tensile strength (Mpa)GB/T 6339-2009 |
hardness |
Blue (green, grey, black) |
Liquid state |
90.0 |
19.0 |
60.0 |
46.0 |
76.0 |
Curing properties of FS1751 (test condition: room temperature) |
||||
Operating time |
Curing time |
Soaking medium curing time |
Operating temperature |
density |
45min |
Room temperature 24h |
72h |
-60℃ to 150℃ |
1.47 |
vitriol |
Hydrochloric acid |
Ammonia liquor |
Sodium hydroxide |
Sodium hypochlorite |
Phosphoric acid |
15 |
10 |
10 |
50 |
15 |
20 |
After the coating has been cured for 72 hours, the solution in the above table is insulated at 50 ° C for 30 consecutive days with a weight change of ≤1
Usage method
1, surface treatment: the pre-coated parts of the rust and coarsening treatment, and then clean with cleaning agent, wipe with dry cloth;
2, configuration: according to A:B=10:1 mix the two components evenly, and use up within the specified operating time limit;
3, brushing: slurry mixed material spray, roll coating or scraping and repair parts, the glue layer is appropriate to 0.2-0.3mm, so that it and the substrate full infiltration;
4, curing: 25 ~ 30℃ curing 24 hours into use, if the temperature is low should be heated or extended curing time to cure.
Storage and storage period |
It belongs to non-dangerous goods, avoid inversion during transportation. Store in a cool and dry place for 12 months. Packing: 9kg/ set, plastic drum; Can be changed according to customer needs. |
