Acrylate type two-component adhesive is a kind of adhesive that is convenient to use, stable to store, widely used, and loved by people. Adhesive materials Iron, steel, aluminum, titanium, stainless steel, ABS, PVC, polycarbonate, glass, polyurethane, polystyrene, glass steel, carbon fiber reinforced materials, ferrite, ceramics, cement, stone, bakelik, wood equivalent or dissimilar bonding materials.
Curing speed is fast, 3-5 minutes in summer, 5-8 minutes in winter can be glued. The adhesive layer structure is firm and not easy to break, resistant to aging and oil pollution, and the adhesive is durable. The oil surface can be bonded, and the adhesive surface does not need to be strictly deoiled. Widely used in cars, motorcycles, agricultural machinery, electrical appliances, hardware, lamps, gas pipes, PVC water pipes, wood products, craft jewelry bonding, sealing, plugging and maintenance:
1. Used for self-adhesive, interadhesive and assembly of various metal parts. Such as stainless steel accessories, elevator car wall stainless steel panel and liner, liner and reinforcement assembly, various castings, alloy parts, pipeline maintenance, instrument, instrument assembly, machinery, vehicle parts maintenance.
2. Non-metallic parts such as most of the hard plastic, wood, stone, concrete parts of the self-adhesive, mutual adhesive, assembly, including plastic lamps, handrails, sunshades, batteries, electrical plastic shell, plywood, various decorative stone, wall materials bonding and maintenance.
3. Bonding between metal parts and non-metal parts. Such as polyvinyl chloride plate, plastic signs, signs and metal base plate bonding, magneto, speaker magnet material and metal base bonding, friction sheet steel sheet assembly, metal, non-metal assembly composite
4. Vehicle industry applications, used in cars, motorcycles plastic panels, bumpers, fuel tanks, water tanks, exhaust pipes.
Main physical and mechanical properties
product |
trait |
Viscosity (Pa.s) |
Operating temperature |
Shear strength (MPa) |
Tensile strength (MPa) |
Initial setting time (min) at 25℃ |
A component |
pink |
5 to 8 |
-60 to +120 |
20 or more |
16 or higher |
3 to 8 |
B component |
Light green |
6 to 9 |
Key points of use
Adhesion surface dust, rust, obvious oil slick, no need to carefully remove oil (strict treatment of the surface of the adhesive object, A, B components according to the proportion of accurate measurement, uniform mixing, bonding effect).
l Small area bonding, according to A: B= 1:1 rough volume ratio of premix, apply to the need for bonding maintenance, finger-pressure 5-10 minutes to solidify adhesive.
Large area bonding, can be double-sided adhesive, no need to premix, the coating should be thin rather than thick, after gluing two sides superimposed, fixed, according to the use of the situation, generally 10-20min to the next process.
The amount of glue should not be too much at one time, and it should be used up in 3-5 minutes. The adhesive surface does not need to be strictly deoiled, just generally clean and keep dry.
l Keep the operating environment well ventilated, slightly smelly, do not enter.
l Keep out of reach of children.
Packing specification: 2kg/ group, 6 groups/box; 4kg/ group, 6 groups/box; 50kg/ group.