One: Product introduction
FS-5319 structural adhesive is a medium viscosity, single-component multi-purpose adhesive, suitable for bonding flat rigid materials, such as bonding ferrite to electroplated metal parts of motors or loudspeaker parts, but also suitable for bonding steel, iron, copper, aluminum and other metals and glass and some hard plastics.
This adhesive is a structural adhesive which can provide the strength of epoxy resin and the curing speed of quick-drying adhesive. Good solvent resistance, fast curing speed, start curing position in a short time.
Two: Product features:
1. Appearance: Purple
2. Viscosity: CPS (25℃) 700-1000
3. Filling gap: (MM) ≤0.4
4. Shear strength (MPA) 15~17
5. Initial setting time (MIN) 10-17
6. Time (H) 24
Seven. Operating temperature (℃) -40-149
Three: Use method:
1. Scrub the part to be bonded with acetone or trichloroethylene 2 times to remove oil and rust.
2, after the solvent volatilizes, evenly apply glue, the amount of glue should ensure that the surface of the adhesive is coated with no leakage of glue.
3. After gluing, let it stand for a few minutes until the initial positioning can be moved.
Four: Precautions:
1. Store at room temperature in a dry and cool place.
2, when using to prevent foreign matter pollution glue.
3. When the filling gap is large or the ambient temperature is too low, curing accelerator can be used to accelerate curing
Five: Packaging: 50ml/ bottle, 120 bottles/box; 250ml/ branch, 40 bottles/box