Current location：
hot product
hot news
message
detail
1. Product description
130 wear-resistant ceramic adhesive, high bonding strength, good toughness,
With steel, iron, cement, ceramic, aluminum alloy, stainless steel and other materials
Has a high adhesion, especially suitable for wear-resistant ceramic sheet paste. apply
When the equipment is washed by ash powder and the material is strongly washed or eroded
The device is pasted with wear-resistant ceramic pieces.
Second, product characteristics
◆ It is composed of modified heat-resistant toughening resin and special curing agent.
◆ Aging resistance, good toughness.
◆ It can be cured at room temperature or by heating.
◆ Used for bonding wear-resistant ceramic pieces below 120℃.
Third, product technical parameters
product |
colour |
density (g/cm3) |
Compressive strength (kg/cm2) GB7124-86 |
Shear strength (kg/cm2) GB1041-79 |
Impact strength (kg/cm2) GB6328-86 |
Coating time (min) |
Curing time |
Operating temperature (° C) |
130 |
white |
1.53 |
867 |
156 |
53 |
30 to 60 |
24h at room temperature or 1h at room temperature +60℃ for 2h |
-60 to 120 |
4. Methods of use
◆ Surface treatment: Dust, oil and rust on the surface of the sticky object are polished or sandblasted, and cleaned with cleaning agent.
◆ Dispensing: Mix the two components evenly according to A: B(mass ratio)= 4:1.
◆ Sizing: evenly apply the adjusted glue to the surface of the material to be glued.
◆ Curing: 24h curing at room temperature, such as reheating to 60℃ for 2h after curing, you can get higher comprehensive performance.
◆ The adjusted glue should be used up before the coating time limit.
