Decontamination, clean carbon accumulation, enhance power and save fuel

 Product characteristics
This product is a strong penetrant, dispersion cleaning agent, with strong permeability, dispersion and solubility, compared with ordinary cleaning agent to improve the cleaning efficiency by 30%. It can effectively clean oxidized deposits, dirt, carbon deposits, glia and oil stains of various parts, carburetors, choke doors, spark plugs, fuel systems, and mechanical parts of vehicles (equipment). This product is a non-destructive sensitive component.
 
Usage method
Take off the supporting extension hose and insert it into the nozzle hole. To clean the general parts, just align the parts to be cleaned and press the nozzle to clean them.
When cleaning the carburetor: 1, remove the air filter (air cell); 2. Spray and wash the holes, pipes and valves in the carburetor at idle speed, wait for a few minutes, and accelerate the engine speed to more than 5000 revolutions; Dirt and carbon deposits in the carburetor are discharged from the exhaust pipe. 3. After installing the air filter, accelerate the engine several times.
 
Matters needing attention
1. Keep away from children; 2. The aerosol tank must be kept upright and the Angle between it and the horizontal plane shall not be less than 45 degrees when used; 3, please construction in the air flow, should avoid spraying on the paint; 4. Avoid entrance. If accidentally splashed into the eyes should immediately rinse with water, timely medical treatment; 5, please store in a place below 40 degrees Celsius, please put in the car. Keep away from heat and fire. Do not expose, puncture or burn the jar.
 
Shelf life: three years     
Net content: 450ml/310g/ bottle, 24 bottles/box