Automotive brake fluid DOT3

Product characteristics

This product is a synthetic automobile brake fluid, which can be mixed with all kinds of original HZY3(DOT3) brake fluid.

The equilibrium reflux boiling point of this product is not less than 205 ° C, and the wet equilibrium reflux boiling point is not less than 140 ° C, which is suitable for frequent braking requirements such as highways and mountain roads, and does not produce air resistance.

This product has good fluidity at -40℃, suitable for low temperature environment, especially in China's northeast, northwest and other cold areas, good braking performance.

This product has a protective effect on the rubber bowl and metal parts of the brake system, and has anti-rust and anti-corrosion effects.

The quality index is in line with GB12981-2012HZY3 standard.

Suitable for all kinds of light and heavy trucks, domestic and imported cars, SUVs and other grades of oil.

Matters needing attention

Keep the packaging container sealed to prevent water absorption or other impurities. Do not touch the body paint, in case of contact, rinse immediately with water. Store away from light and away from children.

Shelf life: 5 years

Net content: 500g/ bottle, 24 bottles/case, 800g/ bottle, 20 bottles/case.

Automotive brake fluid -DOT4

The automobile synthetic brake fluid has a balanced reflux boiling point with water resistance and stability, which can ensure that the automobile still has good braking performance in harsh working environment (such as hot or cold environment). Its comprehensive performance is better than that of alcohol ether and ordinary ester synthetic brake fluid in the market.

Suitable for automotive disc, drum and non-slip brake systems, clutch systems and other environments requiring DOT4/HZY4.

1. Product characteristics

High boiling point, equilibrium reflux boiling point ≥230℃, wet equilibrium reflux boiling point ≥155, ensure stable and safe braking performance under severe pressure.

Good low temperature fluidity, -40℃ low temperature kinematic viscosity ≤1500, to ensure good performance in cold areas.

Excellent corrosion resistance, effective protection of brake system and clutch metal components.

The rubber bowl of the brake system has no corrosion and dissolution effect to ensure a good sealing effect.

Ii. Precautions

Check whether the brake fluid seal is good before use. After use, the container should be sealed to prevent the gradual absorption of moisture in the exposed air and affect the braking effect.

Exhaust brake fluid cannot be reused.

Brake fluid will be corrosive to the car paint, if there is an overflow should be wiped immediately.

Avoid direct contact with skin, if contact, wash immediately with water or medical treatment.

Make sure that the brake fluid container is clean. Dust, sewage, oil or other substances may affect the brake fluid effect.

Implementation standard: GB12981-2012

Shelf life: 5 years