Current location：
hot product
hot news
message
detail
Pagani series sealant, seal and repair different shapes of the gap; It can be used in cars such as Daimler, Chrysler, Volkswagen, Ford, Toyota and Nissan and many other brands.
Solvent-free, able to fill planar gaps and fast curing. Temperature resistance ranges from -80°F (-62 ° C) to 650°F (343 ° C). Medium resistant, capable of gasoline, diesel, grease, lubricating oil, fresh water, sea water, sunlight, ozone and so on.
Especially suitable for engine, gearbox, rotating shaft, axle, cylinder liner, plastic cover and other joints bonding sealing, in the rough surface bonding effect is more significant.
Instructions: 1. Remove the residual part of the gasket adhesive.
2, clean and degreased the sealing surface, and then dry,
3, Apply the adhesive to the surface of the parts to be bonded, and then quickly install the two parts (5 to 15 minutes after the surface begins to cure).
4, small gaps can be filled immediately, large gaps should pay attention to the curing time (0.1-0.2mm/hour)
5. Cover the hose cap after use
Storage: Please store in a cool and dry place with a temperature below 27℃.
Caution: Keep away from children
