产品中心新网站资料
产品中心新网站资料

产品中心新网站资料

200 series thread locking sealant

Fill the thread gap to form a dry film, lock nuts, bolts and screws to avoid loosening due to vibrati……

Related
message
detail
content details

Fill the thread gap to form a dry film, lock nuts, bolts and screws to avoid loosening due to vibration, can play a good sealing, rust and corrosion prevention. Only a small amount of 200 Series thread locking sealant is required to ensure product quality and reliability. Single component, fast curing, wide temperature range, the cured material is resistant to water, oil, shock and corrosion; In the case of slight surface pollution, it still has a good locking, sealing or bonding effect; A wide range of strengths, viscosity characteristics and thread locking agents for use in harsh environmental conditions offer options for solving your production and maintenance problems.
1222 thread locking sealant
Packing specification: 10ml/ bottle, 240 bottles/box; 50ml/ bottle, 120 bottles/box; 250ml/ bottle, 40 bottles/case
Low strength, thixotropic viscosity, for frequently removed screw locking and sealing, one head and small size screws, pipe head locking and sealing.
1242 thread locking sealant
Packing specification: 10ml/ bottle, 240 bottles/box; 50ml/ bottle, 120 bottles/box; 250ml/ bottle, 40 bottles/case
General purpose, medium strength, thixotropic viscosity, such as screw, nut locking
 
1243 thread locking sealant
Packing specification: 10ml/ bottle, 240 bottles/box; 50ml/ bottle, 120 bottles/box; 250ml/ bottle, 40 bottles/case
Medium strength, good oil capacity, can be used on slightly oily surfaces. It can be used for inert surfaces, fast curing, such as tank bottom screws that need to be removed frequently.
 
1262 thread locking sealant
Packing specification: 10ml/ bottle, 240 bottles/box; 50ml/ bottle, 120 bottles/box; 250ml/ bottle, 40 bottles /

Thixotropic viscosity, good chemical resistance, suitable for most metal surfaces, such as engine thread locking and sealing, can withstand strong vibration
 
1271 thread locking sealant
Packing specification: 10ml/ bottle, 240 bottles/box; 50ml/ bottle, 120 bottles/box; 250ml/ bottle, 40 bottles/case
Medium viscosity, thread locking and sealing.
 
1272 thread locking sealant           
Packing specification: 10ml/ bottle, 240 bottles/box; 50ml/ bottle, 120 bottles/box; 250ml/ bottle, 40 bottles/case
High viscosity, temperature resistance, used for bolt locking and sealing under high temperature conditions.
 
1277 thread locking sealant           
Packing specification: 10ml/ bottle, 240 bottles/box; 50ml/ bottle, 120 bottles/box; 250ml/ bottle, 40 bottles/case
High viscosity, chemical resistance, suitable for metal surface, large size thread locking, sealing, flange sealing, can replace gasket.
 
1290 thread locking sealant           
Packing specification: 10ml/ bottle, 240 bottles/box; 50ml/ bottle, 120 bottles/box; 250ml/ bottle, 40 bottles/case
Medium strength, low viscosity, used for threaded locking and sealing, welding seams, casting sand holes (less than φ0.1) and other microhole sealing.
 
340 thread locking sealant                    
Packing specification: 10ml/ bottle, 240 bottles/box; 50ml/ bottle, 120 bottles/box; 250ml/ bottle, 40 bottles/case
Medium viscosity, universal type. Used for locking and sealing of threads. Used for retaining and sealing bearings or flanges.
 
Main physical and mechanical properties
 

Quality of production

1222
The purple

1242
LAN

1243
LAN

1262
red

1271
red

1272
red

1277
red

1290
green

340

Light yellow

Fill gap (mm)

0.13

0.13

0.13

0.13

0.13

0.25

0.25

0.10

0.25

Viscosity (mPa.s)

1200

1200

2300

1900

500

9500

7000

37

2500 ~ 3500

Breaking moment (N.m)

6

12

20

21

25

28

38

30

20

Average disassembly torque (N.m)

4

4.8

7

25

31

25

32

29

18

Operating temperature (℃)

-54 ~ +149

-54 ~ +149

- 55

-54 ~ +149

-54 ~ +149

-54 ~ +230

-54 ~ +149

-54 ~ +149

-55 to +149

25℃ curing speed
(Initial solid/full solid)

20 minutes /24 hours

20 minutes /24 hours

20 minutes /24 hours

10 minutes /24 hours

20 minutes /24 hours

20 minutes /24 hours

60 minutes /24 hours

3 minutes /24 hours

10 points out of 24
Hour (s)

 
Note: The failure moment and the average disassembly moment are measured after 24 hours of curing on the M10-2 bolt-nut without clamping force.
Key points of use
l General purpose threads should be wiped with a cloth, important threads should be cleaned with acetone, and then coated with adhesive.
l Thixotropic glue should be shaken well before use.
l For blind holes, it is necessary to apply locking glue inside the holes;
l Long meshing bolts need to be coated on both internal and external threads.
l For bolts that are locked with low and medium strength anaerobic glue, they can be removed using ordinary hand tools. The bolts, which are locked with anaerobic glue, are removed using high torque or heated at high temperature (250 ° C).
l Unused glue should not be mixed into the original glue, metal and oil should not be mixed into the bottle.
Suitable for the workpiece material for iron, copper and other metal materials, but the surface of the oxide layer, inert metal or non-metallic materials, curing speed is slow, can be used with agents. Allow to dry and apply glue for assembly.
l Store in a cool place away from light, the storage period is one year, more than one year after the glue is not abnormal, can still be used

MESSAGE

LEAVE A MESSAGE