The equipment in the metallurgical industry works in heavy load, high temperature and high humidity conditions. The equipment is seriously damaged. Fengshen series of products to solve the emergency maintenance and a large number of equipment wear, corrosion problems, can run, drip, leakage problems. A little easier with the glue on the problem.

Metallurgical industry solutions

Increase productivity and reduce downtime

1, high-speed wire factory spinning workshop, with 1515 anaerobic plane sealant sealing gear box cover

2, rolling machine reducer output shaft journal wear, wear repair agent.

3, rolling mill in the thick plate car, the roll long-term work, the working journal (with a diameter of 500×1000) seriously scratched, can not be used normally. Wear repair

After the dose is carried out, it continues to be used under thousands of pressures, saving customers a lot of money.

4, rolling steel mill, bearing copper tile is damaged. Unable to continue to use, the damaged shaft seat was rebuilt with antifriction repair agent.

5, steel mill exhaust fan due to acid steam corrosion. The surface was coated with a protective layer with anti-corrosion repair agent, and good wear-resisting and anti-corrosion effects were obtained.

6, rolling steel joint gear box bearing hole wear, scratch up to 3mm groove. Bearing holes are reconstructed using antifriction repair agent.

7. Motor foundation fracture, cast iron material. The use of structural adhesive, normal temperature construction without thermal effect, the effect is good.

8, with the adhesive sleeve composite process steel mill iron bag wear trunnion.

Sync with customer needs

Numerous models to meet different needs

Due to the production of sand hole, porosity, shrinkage, ballast, crack, etc., the quality of castings is seriously affected, resulting in waste. However, due to the poor fluidity of metal materials, thermal expansion and cold contraction, and the limitations of the casting process, casting is difficult to avoid. Fengshen multi-metal repair series products are metal and alloy as aggregate polymer metal composite repair materials, widely used in the casting industry, for many customers to save a large number of unqualified products, to achieve casting zero.